Direct drive systems
      "Ruchservomotor"

Milling-engraving machine 2D+F (3D)

 
 Specially developed mill-engraving machine on the basis of linear synchronous motors for manufacturing the rolling shaft - manufacturing of a cliche for a printed matter on cylindrical surfaces(mill and engraving the 3D image on cylindrical surfaces).

Photo of 2D+F machine

Technical data of machine
Parameter
Value
Movement on axiz, mm
 X 
Z
F
 
750
75 
n * 360
Axis Z in addition can move by the screw - nut on height of 95 mm with fixing position with the help chock clips.
Position accuracy on X and Y axis at movement 320mm, micron
±5*
Max. velocity at working stroke, mm/min
160
Max. velocity at no-load operation, mm/min
6000
Max. dimensions of work cylindrical detail, mm
dia 300 õ 900
Max. weight of work cylindrical detail, kg
100
Force in direction of movement X è Z, N
500
Resolution, mm
0,001*
Repeatability, mm
0,001*
Torque on axes F, Nm
108
Position accuracy on F axis, arc.sec.
6
Resolution on F axis, arc.sec.
1
Repeatability on F axis, arc.sec.
±1
Maximal velocity on F axis, rpm
10

* - under thermostable condition.