LaserCut 3015 3

 Laser cutting machine "LASERCUT-3015-3" with laser 2 kW is used for automatic cutting the next metal sheets:
1. Steels - thickness up to 25 mm,
2. Stainless steel - to 10 mm,
3. Aluminium to 6 mm,
4. Brass to 5 mm,
It can be used as an independent product with individual service, and as a part of technological lines

Technical advantages of laser machine LASERCUT-3015-3:

The maximum productivity of the laser machine in a range of thickness of metal from 0,5 to 16 mm;
High EFFICIENCY fiber-optical laser;
High speed of moving ;
Stability dynamic and accuracy characteristics during all term of operation;
The high reliability of system caused by absence of deterioration of elements of a drive and use Fiber laser of firm IPG Group(Russia).

Design basic elements

   Lazercut 3000

1. Gantry construction on the linear motors base provides:

-Programmed control by moving of a laser head on axes , Y, Z;
-Automatic maintenance of a constant backlash between a laser head and processed preparation;
-Minimum quantity of single movings on axis Z;
-Speed of single movings on axes , Y - up to 180 m/mines;
-Axial acceleration - up to 1.5g;
-Planimetric acceleration - up to 1.5g;
The-error of repeated positioning - not worse 0,05 mm;
-Fixing of shuttle tables at processing;
-Protection guideways and motors from a dust and combustion products;

2. The fiber laser.

- The fiber laser is made by firm IRE-POLUS is a part of international corporation IPG Photonics Corp.
- The fiber laser used for fine cutting of metal sheet of a constructional steel with thickness 0.5 - 20 mm.

Advantages of the fiber laser:
1. Because of the a wave length of fiber laser 10 times less, than at 2 the laser
(fiber - 1,06 microns, 2 - 10,6 microns) the higher density of energy on a material is reached.
Therefore efficiency of its at cutting application with the thickness 2-8 mm in 2,5-3 times higher.
At increase of material thickness the efficiency decrease, but all the same remains above in 1,5 times.
Practical result:
- The cutting width is less
- for realisation of the same parametres of cutting is required laser with smaller capacity.
2. Laser radiation from fiber laser transferred per optical fiber directly in a zone of a focusing head,
That considerably simplifies the kinematic scheme of the machine tool.
At application 2 of the laser the organisation of an optical path with application of reflective
optics is necessary, that considerably reduces reliability of work of system as a whole.
3. The EFFICIENCY of the fiber laser up to 25%, (unlike EFFICIENCY 2 of the laser - 8-10 %)
4. Economy of the electric power
5. The durability of the fiber laser makes 50 thousand business hours.


3. Controller

Servocontroller LSMC-4 is used for linear and circular interpolation carries out functions of control
by drives of the laser machine tool and function CNC:
- spline interpolation at travel per curvilinear trajectory of any complexity in 2 - 3 co-ordinate system
(the trajectory is set by points at which working off the drive not stop in intermediate points).
-carries out also functions of the controller of electroautomatics (QLC);
the Complete decision for typical task is reached at connection of LSMC to the panel computer
through standard interface RS232 or USB. The language for PC programming is opened.


cncRAD lkz

4. The software CncKAD

The program CncKAD offers a wide spectrum of operations of plotting for work with laser and plasma
machine tools.
CncKad supports a full cycle of operations CNC, including plotting, automatic and interactive modes
of processing, the post-processor, graphic simulation of execute codes, manual and automatic nesting,
loading and reception of programs.
- the File transfer from Solid Works, SolidEdge and Autodesk Inventor, direct reading the AutoCAD files.
- cncKad support of a wide number of machine tools and support various language.
- cncKad - the powerful decision for fast creation of execute program and transfers of the program
from one machine tool to another or from the machine tool of one type to the machine tool of other type.
- cncKad it is accessible, user-friendly and it is accompanied by the full documentation in corresponding
language and has automatic procedure of installation.

The machine LaserCUT is made with using of modern accessories and the advanced world experience.


Laser cutting

LaserCut 3015-1

laser machines
LaserCut 3015-2

LaserCut 3015-3

+375 (17) 254 04 43
: +375 (17) 254 04 48
lasr machines
LaserCut LaserCut 3015-1 LaserCut 3015-2 LaserCut 3015-3
our company
Linear motor
Laser cutting machines



























specifications LaserCut-3015-3


Maximal travel , 3050(max 12000)
Maximal travel Y, 1550 (max 2500)
Maximal travel Z, 100
control systems LSMC5x2
Position accuracy, mm ±0.01
Readability 0.001
Maximal velocity X,Y, m/min 180/180/60
Controller type LSMC4
Controller interface RS232,USB
Recommended laser power, kW   2.0-4.0**
Maximal thickness of steel/stainless steel, mm 25/12
, 900
Overall dimensions of machine, mm 8700x2500x2500
Weight of machines kg 7800
Protect cabin inclosure


Rambler's Top100